Softener-size calculator

Enter household size, water hardness, optional iron, and how many days you want between regenerations. The tool recommends the next standard grain capacity. Look up a city hardness figure first if you have one from this site, or use a lab or utility reading.

Softener-size calculator

Estimate the grain capacity a water softener needs for a household. The form runs in your browser. If JavaScript is off, the formula is below so you can work it by hand.

Whole numbers from 1 to 20.
Hardness unit
Enter gpg (0–100) or switch the unit to mg/L (0–1,710).
Leave at 0 if you do not have an iron reading. Allowed range: 0–20.
Whole numbers from 1 to 21. Default is 7.

How the estimate is worked out

  1. Daily water use = people × 75 gallons.
  2. Adjusted hardness (gpg) = hardness in gpg + (4 × iron in ppm). If you start from mg/L, divide by 17.1 first.
  3. Daily grain removal = daily water use × adjusted hardness.
  4. Capacity needed = daily grain removal × days between regenerations.
  5. Recommended size = the next standard capacity at or above that figure: 16k, 24k, 32k, 40k, 48k, 64k, or 80k grains.

This is a rule-of-thumb estimate, not a substitute for a laboratory water test or a professional sizing. The 75 gallons per person per day figure is a common planning assumption, not a measurement of your house. Iron, manganese, and other contaminants can change the capacity you need. Always check the manufacturer’s specifications.

Figures on Hard Water by City come from official utility sources when we have them. The calculator itself is only a planning estimate.